Miyoo Mini Plus - SD Card Backup

Gaming Consoles
1

Download the Miyoo Mini Plus backup file here

Download Image USB

STEP 1: Download & Open ImageUSB

  1. Download ImageUSB (ZIP file).

  2. Extract the ZIP.

  3. Right-click ImageUSB.exe → Run as Administrator

:warning: Do NOT open it normally. Admin mode is required.

image
image780×718 179 KB

STEP 2: Insert SD Card via Card Reader

  1. Insert the sd card via sd card reader into your PC.

STEP 3: Select the Correct USB Drive

  1. In ImageUSB, look at the top list.

  2. Tick :white_check_mark: the checkbox of your USB drive.

  3. Match Size and Drive Letter to be 100% sure.

:warning: Selecting the wrong drive will erase it.

image
image780×718 179 KB

STEP 4: Choose “Write Image to USB Drive”

  1. In the middle section:
  2. Select Write image to USB drive
  3. Tick :white_check_mark: Post Image Verification (recommended)

STEP 5: Select the miyoo.bin File

  1. Click Browse
  2. Select your Miyoo .bin file
  3. Confirm the file name appears in ImageUSB

STEP 6: Start Flashing

  1. Click Write

  2. Click YES when warning appears

  3. Wait patiently (2–5 minutes)

:no_entry: Do NOT remove USB
:no_entry: Do NOT close ImageUSB

STEP 7: Flash Completed

  1. Wait until you see Write completed / Verification successful
  2. Close ImageUSB

image
image700×591 92.6 KB

STEP 8: Safely Remove USB

  1. Click Safely Remove Hardware in Windows
  2. Remove the USB drive

image
image229×252 32.5 KB

STEP 9: Use Micro SD Card with Miyoo Mini Plus

  1. Insert the sd card into Miyoo Mini Plus

  2. Power ON the device